Panel BSP

How to update Linux HMIs

BSP update via web browser
Download "UNXX_BSP_X.XX.zip" file and extract content. Open a web browser, and connect to HMI with this syntax:
https://<ipAddress>/machine_config
From Management  tab expand any component and for each one click "Update", then drag and drop files inside the browser and follow instructions.

Recommended sequence:

- update bootloader
- update Config OS
- update Main OS
- System Settings > Manage > Settings > Restore
- System Settings > Manage > Data > Clear

BSP update via USB key
Download "UNXX_BSP_X.XX_autoupdate.zip" file and extract content in an empty USB stick.
Insert the USB stick in the panel and wait for the update procedure to be finished (three acoustic signals will happen at the end of procedure)

NOTE: With this procedure System Settings will be restored to factory settings. System Settings includes Network Settings. This means that it could be necessary to re-set HMI IP Address.

NOTE: When updating from BSP 1.0 to BSP 1.3 data will be automatically cleared.

How to update WCE HMIs

Download "UNXX_BSP_X.XX.zip" file and extract content in an empty USB stick.
Insert the USB stick in the panel. Enter in system settings (config mode) by powering on the HMI and tap-tapping on the screen.
Navigate in the menu for any components, and select "Download" button for each component. Choose the file in USB Stick path.

For more detailed information refer to JMobile User Manual.

Software available in this web page is based on OpenSource. Visit the license statement for OpenSource Software page for more details.