What to know
JMobile CoDeSys target allows to configure the CAN Master and its baudrate property from "PLC Configuration" tab (see image below):
The allowed baudrate depends from the Target used, in particular:
EXOR/SITEK CoDeSys for JMobileWCE (WCE/MIPS)
For this target the allowed baudrate values are (bps): 10K, 20K, 50K, 100K, 125K, 250K, 500K, 800K, 1M
EXOR/SITEK CoDeSys for JMobileWCE (WCE/ARM UN30)
For this target the allowed baudrate values are (bps): 10K, 20K, 50K, 100K, 125K, 250K, 500K, 800K, 1M
EXOR/SITEK CoDeSys for JMobileWCE (WCE/ARM UN31)
For this target the allowed baudrate values are (bps): 10K, 20K, 50K, 100K, 125K, 250K, 500K, 1M
NOTE: The 800Kbps speed is NOT supported by the operator panels of eTOP500 and eTOP600 series with 600 Mhz ARM Cpu (UN31 target).
Applies to
eTOP400, eTOP500 and eTOP600 Series Panels
CODESYS v2 internal PLC
