Skip to content

JMobile Suite & Downloads

In this page you can find all the JMobile software downloads.

Software available in this web page is based on OpenSource. Visit the license statement for OpenSource Software page for more details.

JMobile Last Version
JMobile Older Versions
Panel BSP

JMobile Suite | Last Version

Software
Collaterals
Applications
Tools
* Minimum BSP version required is 1.3. Check panel BSP page from the link below.
 
WCE based model families such as eTOP500/600 or H3/H4, are not compatible with this version.
Latest version supporting these families is 4.0, available for download below in this page.

JMobile Suite | Older Versions

Software
Collaterals
* This version may contain hotfixes or minor improvements. Changes are not documented. Changes in “latest hotfix build” have NOT been subject to full software validation process, as it is the case for official releases. Version number available as “latest hotfix build” may change at any time without advance notice. EXOR recommends using “latest hotfix build” only after careful approval by experienced authorized personnel. In case of any doubt please refer to your local support or write to support.it@exorint.com

Panel BSP

Compatible with JMobile 4.5 and newer
Compatible with JMobile 4.0 and older
Web HMIs

* This operation requires System Settings reset, including Network Settings

** Important! Update to 512MB support is allowed only on HMIs manufactured later than March 2016. Updating older units will break HMIs. This update procedure will delete runtime, projects and any data on HMI. Open README.txt file for more info.

 

How to update Linux HMIs

BSP update via web browser
Download "UNXX_BSP_X.XX.zip" file and extract content. Open a web browser, and connect to HMI with this syntax:
https://<ipAddress>/machine_config
From Management  tab expand any component and for each one click "Update", then drag and drop files inside the browser and follow instructions.

Recommended sequence:

- update bootloader
- update Config OS
- update Main OS
- System Settings > Manage > Settings > Restore
- System Settings > Manage > Data > Clear

BSP update via USB key
Download "UNXX_BSP_X.XX_autoupdate.zip" file and extract content in an empty USB stick.
Insert the USB stick in the panel and wait for the update procedure to be finished (three acoustic signals will happen at the end of procedure)

NOTE: With this procedure System Settings will be restored to factory settings. System Settings includes Network Settings. This means that it could be necessary to re-set HMI IP Address.

NOTE: When updating from BSP 1.0 to BSP 1.3 data will be automatically cleared.

How to update WCE HMIs

Download "UNXX_BSP_X.XX.zip" file and extract content in an empty USB stick.
Insert the USB stick in the panel. Enter in system settings (config mode) by powering on the HMI and tap-tapping on the screen.
Navigate in the menu for any components, and select "Download" button for each component. Choose the file in USB Stick path.

For more detailed information refer to JMobile User Manual.

Software available in this web page is based on OpenSource. Visit the license statement for OpenSource Software page for more details.

Services

Make or buy
Embedded Design
Digital Assessment